بنظر من DDR4 پایداری بالایی نداره و تا یک سال اینده مین بورد ها مجهز به رمهای DDR 5 میشن
مانند جهشی که روی گرافیک هال اتفاق افتاد
Like its predecessor, GDDR4, GDDR5 is based on DDR3 SDRAM memory, which has double the data lines compared to DDR2 SDRAM. GDDR5 also uses 8-bit wide prefetch buffers similar to GDDR4 and DDR3 SDRAM.
GDDR5 SGRAM conforms to the standards which were set out in the GDDR5 specification by the JEDEC. SGRAM is single-ported. However, it can open two memory pages at once, which simulates the dual-port nature of other VRAM technologies. It uses an 8n-prefetch architecture and DDR interface to achieve high performance operation and can be configured to operate in ×32 mode or ×16 (clamshell) mode which is detected during device initialization. The GDDR5 interface transfers two 32-bit wide data words per write clock (WCK) cycle to/from the I/O pins. Corresponding to the 8n-prefetch, a single write or read access consists of a 256-bit wide two CK clock cycle data transfer at the internal memory core and eight corresponding 32-bit wide one-half WCK clock cycle data transfers at the I/O pins.
GDDR5 operates with two different clock types. A differential command clock (CK) as a reference for address and command inputs, and a forwarded differential write clock (WCK) as a reference for data reads and writes, that runs at twice the CK frequency. Being more precise, the GDDR5 SGRAM uses a total of three clocks: two write clocks associated with two bytes (WCK01 and WCK23) and a single command clock (CK). Taking a GDDR5 with 5 Gbit/s data rate per pin as an example, the CK clock runs with 1.25 GHz and both WCK clocks at 2.5 GHz. The CK and WCKs are phase aligned during the initialization and training sequence. This alignment allows read and write access with minimum latency